How to reset power outage on Frigidaire refrigerator

How to reset power outage on Frigidaire refrigerator


Power outages can be an inconvenience, especially when it comes to household appliances like refrigerators. If you own a Frigidaire refrigerator and experience a power outage, don't worry! We'll guide you through the process of resetting your Frigidaire refrigerator after a power outage, ensuring your appliance gets back up and running smoothly.

Step-by-Step Guide

Here’s step-by-step Guide to Resetting Power Outage on Frigidaire Refrigerator:


  • Safety First:
    Before proceeding with any troubleshooting steps, it's important to ensure your safety. Make sure your hands are dry, and if needed, wear rubber gloves or use a dry cloth to handle any electrical components. Additionally, unplug the refrigerator or switch off the circuit breaker that supplies power to it.

  • Wait for Power Restoration:
    During a power outage, it's crucial to wait for the power to be restored before taking any further steps. Once the power is back on, allow a few minutes for the electrical system to stabilize.

  • Locate the Control Panel:
    The control panel on your Frigidaire refrigerator is typically located on the front of the appliance. It may be on the outside of the door or hidden behind a panel. Check your refrigerator's user manual for specific instructions on locating the control panel.

  • Access the Control Panel:
    Once you've found the control panel, open it or remove the protective cover to access the buttons and display. Some Frigidaire refrigerators have a digital display, while others have mechanical controls.

  • Reset Options:
    Depending on the model of your Frigidaire refrigerator, there are different reset options available. Here are two common methods:
  • Reset Button:
    Look for a dedicated reset button on the control panel. Press and hold this button for a few seconds until you hear a beep or see the display reset. Release the button once the reset is complete.
  • Power Button:
    If there is no specific reset button, try pressing and holding the power button until the refrigerator turns off. Wait for a few seconds and then press the power button again to turn it back on. This action often triggers a reset.
  • Confirm Reset:
    After performing the reset, check the display or listen for any audible cues from the refrigerator. It should indicate that the power has been successfully restored, and the appliance is now ready for use. Take note of any error codes or error messages displayed, if applicable.

  • Adjust Settings:
    Once your Frigidaire refrigerator has been reset, it's essential to ensure that the settings are adjusted appropriately. Check the temperature settings to ensure they are set to your desired levels for both the refrigerator and freezer compartments. Follow the instructions provided in the user manual to make any necessary adjustments.

  • Monitor Operation:
    After resetting the refrigerator and adjusting the settings, keep an eye on its operation for the next few hours. Ensure that it is cooling properly, and the temperature inside remains within the recommended range. If you notice any issues or unusual behavior, consult the troubleshooting section of your user manual or contact Frigidaire's customer support for further assistance.


 Why is resetting important?

Resetting your Frigidaire refrigerator after a power outage is necessary to ensure the proper functioning of the appliance and maintain the quality and safety of the food stored inside. Here are a few reasons why resetting is important:


  • Power Surge Protection:
    During a power outage, there is a possibility of power surges when the electricity is restored. Power surges can potentially damage electrical components and disrupt the refrigerator's normal operation. By resetting the refrigerator, you allow it to recalibrate and adapt to the restored power supply, minimizing the risk of damage from power surges.

  • System Reboot:
    Resetting the refrigerator acts as a system reboot. It clears any temporary glitches or errors that may have occurred during the power outage. Sometimes, power interruptions can cause the refrigerator's control system to freeze or malfunction. By resetting, you give the system a fresh start, allowing it to resume normal operations.

  • Temperature Control:
    After a power outage, the refrigerator may lose its previous temperature settings, resulting in improper cooling or freezing. Resetting allows you to reestablish the desired temperature settings, ensuring that your perishable items remain adequately chilled and your frozen foods remain frozen.

  • Error Code Resolution:
    In some cases, power outages can trigger error codes or error messages on the refrigerator's display panel. These codes indicate specific issues that need to be addressed for the refrigerator to function correctly. Resetting the appliance can help clear these error codes and initiate the troubleshooting process if necessary.

  • Safety Precaution:
    Resetting your Frigidaire refrigerator after a power outage is also a safety precaution. It allows you to verify that the refrigerator is functioning properly and not experiencing any issues that could pose a safety risk. By ensuring the proper operation of your appliance, you can prevent potential hazards such as food spoilage or electrical malfunctions.

    Overall, resetting your Frigidaire refrigerator after a power outage helps restore normal functionality, ensures proper cooling and freezing, addresses any error codes or issues, and provides peace of mind regarding the safety of your appliance and the food it stores. It's a simple yet important step to take to maintain the performance and longevity of your refrigerator.

  • Limitations: 
    While resetting your Frigidaire refrigerator after a power outage is generally a useful step, it's important to be aware of some limitations associated with this process. Here are a few limitations to consider:

  • Complex Issues:
    Resetting the refrigerator may resolve minor issues or temporary glitches caused by a power outage. However, if there are underlying or complex problems with the appliance, a simple reset may not be sufficient to address them. In such cases, it is recommended to consult the user manual or contact Frigidaire's customer support for further assistance.

  • Persistent Errors:
    If the refrigerator continues to display error codes or malfunctions even after a reset, it could indicate a more significant problem that requires professional attention. Resetting alone may not fix the issue, and it's advisable to seek professional repair services to diagnose and resolve the problem accurately.

  • Time to Stabilize:
    After a power outage, it takes some time for the refrigerator's cooling system to stabilize and reach the desired temperature. Resetting the refrigerator alone will not expedite this process. It's essential to allow the appliance sufficient time to cool down and reach optimal temperatures before expecting it to function normally.

  • Data Loss:
    Some modern refrigerators come with additional features like digital displays, temperature history, and settings memory. However, during a power outage, there is a possibility of data loss or resetting of these customized settings. It's important to be aware that a reset may result in the loss of any personalized configurations or stored data.

  • Individual Model Variations:
    Frigidaire offers a wide range of refrigerator models with varying features and control panels. The exact reset process may differ slightly depending on the specific model you own. It's crucial to consult the user manual or Frigidaire's official documentation for accurate instructions tailored to your refrigerator model.

    Remember, while resetting your Frigidaire refrigerator is a valuable step, it may not always resolve all issues or address underlying problems. If you encounter persistent problems, it's recommended to seek professional assistance from authorized service providers or contact Frigidaire's customer support for further guidance.



Experiencing a power outage can disrupt the functioning of your Frigidaire refrigerator, but the process of resetting it is relatively straightforward. By following the step-by-step guide, you can quickly restore power to your appliance and ensure it continues to preserve your food at the optimal temperature. Remember to consult your user manual or reach out to Frigidaire's customer support if you encounter any difficulties or persistent issues with your refrigerator after a power outage.

Back to blog